Search in Category
SCBA (Self Contained Breathing Apparatus)
Search term required.
Filter Your Search
Brand
Browse Categories
Loading...
SCBA (Self Contained Breathing Apparatus)
Viewing Page 10 of 65
(644 results)
AIR COMP-1
Items #:
AIR COMP-1
Dual outlet breather box has been designed for operating 1 - 2 pressure demand airline respirators. The TA-1 compressor has been designed to operate 1 or 2 pressure demand airline respirators. Grade-D filtration must be provided in the form of a 1 or 2 worker Breather Box.
Features
Designed for use with Two Pressure Demand Respirators Only
115 / 230 Volts AC 60 Hz compressor
Standard filter change indicators for all 3 filtration stages
99.99 percent filtration efficiency @ 0.01 micron
9V disposable batteries
External light & alarm signal
OSHA 1910.134 compliant
Includes the TA-1 compressor, BB15-CO dual outlet Breather Box
H-25-3 connect hose
This compressor is not designed for use with constant flow respirators or Vortex cooling tubes.
AIR COMP-2
Items #:
AIR COMP-2
Dual outlet breather box has been designed for operating 1 - 2 pressure demand airline respirators. The TA-1 compressor has been designed to operate 1 or 2 pressure demand airline respirators. Grade-D filtration must be provided in the form of a 1 or 2 worker Breather Box.
Features
Designed for use with Two Pressure Demand Respirators Only
115 / 230 Volts AC 60 Hz compressor
Standard filter change indicators for all 3 filtration stages
99.99 percent filtration efficiency @ 0.01 micron
9V disposable batteries
External light & alarm signal
OSHA 1910.134 compliant
Includes the TA-1 compressor, BB15-CO2 2 outlet Breather Box
H-25-3 connect hose
This compressor is not designed for use with constant flow respirators or Vortex cooling tubes.
AIR COMP-3
Items #:
AIR COMP-3
The TA-3 has twin ASME receiver tanks that act as the mounting frame for the compressor. The use of the receiver tanks provides air that has been cooled to within 10 degrees of the ambient temperature. We've added pneumatic tires for ease of mobility in rough terrain and a bottom skid plate for going up or down stairs. This plate becomes the frame for the addition of a reserve air cylinder on the model TA-3EA.
This compressor is not designed for use with constant flow respirators or Vortex cooling tubes.
All compressors MUST be placed in a clean air environment per OSHA 1910.134
Features
Rotary vane air compressor rated for continuous duty
Pressure range to 110psi output
2 HP electric motor, 1750rpm continuous duty - thermally protected
115/230 VAC 1-phase, 60Hz, 17.2 amps (Requires 20amp service)
Low maintenance - 500 hours between oil changes
10 inch pneumatic tires
50,000 hour minimum vane life
Built-in skid plate for stair climbing
USDA approved food grade oil in compression end
Automatic pressure unloading - full modulation air control
Breather Box Grade-D filtration package required
Noise level below 70 dbA at 3 feet
8 Gallon Twin-Air tank assembly, 8.5cf air storage @ 110psi, ASME coded
1/2" 5000 series Hansen style coupling on air outlet
Optional explosion-proof motor (230/3 VAC only), Model TA-3EXP
Dimensions: 46"L x 24"W x 22"H
Weight: 150 lbs.
AIR COMP-3EA
Items #:
AIR COMP-3EA
This compressor system is designed to provide automatic back-up air for up to 3 workers in the event of compressor failure. An optional 60 or 87cf cylinder can be installed on the compressor frame to provide additional egress air.
The package consists of the Auto-Air Breather Box BB30-COAA, the TA-3EA compressor supplied with a CGA-347 high pressure reducing regulator, primary and secondary hoses. NIOSH requires the use of a 5 minute airline escape respirator when working in IDLH environments. The Auto-Air feature does not replace the NIOSH requirement, however, some work environments may require longer than a 5 minute airline hip bottle to safely egress the hazardous area.
This compressor isnot designed for use with constant flow respirators or Vortex cooling tubes.
AIR HP-CW1-346
Items #:
AIR HP-CW1-346
Air Systems International 4-Outlet Breathing Air Manifold Assembly with Safety Relief Valve has a low-pressure alarm whistle and uses a 3,000 psig regulator. Manifold assembly provides CGA-346 connection and does not require cylinders. It requires 4 fittings for easy installation.