Search Results

This air storage cylinder has steel construction with a pressure rating of 4500 PSIG and an 444 cubic foot capacity.

The AIR-KADDY's innovative modular aluminum design allows for expansion to accommodate your SCBA storage requirements today and in the future! This free standing SCBA storage rack is lined with nylon pads to prevent cylinder scratches. Series 24 is designed to fit in fire/rescue trailers and trucks requiring a narrower profile. Features 11 breathing air cylinder storage capacity Custom sizes available Optional thread savers available Size (W x D x H) - 25.25 x 22.25 x 48 inches

The AIR-KADDY's innovative modular aluminum design allows for expansion to accommodate your SCBA storage requirements today and in the future! This free standing SCBA storage rack is lined with nylon pads to prevent cylinder scratches. Series 24 is designed to fit in fire/rescue trailers and trucks requiring a narrower profile. Features 8 breathing air cylinder storage capacity Custom sizes available Optional thread savers available Size (W x D x H) - 25.25 x 22.25 x 32 inches

The AIR-KADDY's innovative modular aluminum design allows for expansion to accommodate your SCBA storage requirements today and in the future! This free standing SCBA storage rack is lined with nylon pads to prevent cylinder scratches. Features 15 breathing air cylinder storage capacity Custom sizes available Optional thread savers available Size (W x D x H) - 37.5 x 22.5 x 36 inches

It has a stainless steel tank which is perfect for wet environments and wherever long vacuum hose lengths are needed. Low maintenance pneumatic motor has a 110 inch water lift maximum vacuum pressure. Features 120 VAC - 60 Hz - 2.3 HP 2 stage bypass (Optional) automatic shut off for wet pickup 11 amps - 1320 watts 115 CFM with 110 inch water lift 15 gallon recovery capacity with 20 gallon stainless steel tank 30 ft / 14 - 3 power cord w/ plug 10 foot of 1 1/2 inch hose 78 dbA On / off switch MIL SPEC water dump valve Motor head with 2 year warranty Includes filters, handles, tool kit & wheel kit

Operates with 2400 - 5000 PSI cylinders.

The system filters compressor air to provide respirator users with Grade-D quality air. The first stage element filters bulk water and particulate, the second stage coalescing filter removes atomized oils and ultra-fine particulate, and the third stage removes organic vapors and odors. Filter change indicators are standard on all three filtration stages. Filtration efficiency is 99.99% @ .01 microns. A built-in intrinsically safe carbon monoxide monitor operates on 115 VAC, or 8-16 VDC for continuous detection. A high intensity audible alarm and light signals the workers of high CO content in their breathing air. A 115 VAC electrical conduit box is provided as standard to provide AC power in and connection for AC powered remote alarms. Filtration components are mounted on powder coated steel panel. Features 100 CFM (123 CFM flow capacity) O2 oxygen & CO carbon monoxide monitor 99.99 percent filtration efficiency @ .01 microns 4 couplings or NPT outlet Integrated carbon monoxide (CO) monitor uses 115 Volts AC or 8 to 16 Volts DC for continuous detection Audible high intensity alarm & light will signal workers to high CO in breathing air supply All portable and fixed breathing air filtration systems meet or exceed OSHA 1910.134, Canadian Z180.1 Breathing Air Standards and British Standard BS-EN 12021:1999 “RESPIRATORY PROTECTIVE DEVICES” All filtration units are designed to flow the NIOSH maximum capacity per worker Air Systems provides at NO CHARGE your first lab certified air quality test of your new breathing air filtration device Please specify 1/4” Hansen style or Schrader style fittings when ordering. Other fittings available for an additional charge.

Pneumatic system features a reserve air trigger at 60 psig and / or loss of electrical power, it automatically switches to reserve air cylinder (or cylinders). Local & optional remote alarms will signal workers that their primary air system is in failure & has switched to a back up air supply system. If IDLH work environments exist, the Auto-Air Breather Box option should be considered. The Auto-Air filtration system was developed to provide Grade-D breathing air with full automatic reserve air in the event of either electrical failure or reduced pressure from the main air source while working in hazardous environments. Reserve air activation occurs at 60 psi and/or loss of electrical supply, the system automatically switches to the reserve air cylinder(s). Local and optional remote alarms signal the workers that the primary air system has failed and has switched to the back-up air system Features Intrinsically safe CSA certified Auto-Air Breather Box CO monitor has a flow capacity of 100 CFM with 4 couplings CSA approved Class I, Div. 1, groups D and C Filtration efficiency 99.99 percent @ 0.01 micron Fully Automatic Reserve Air System for Work in IDLH Environments Note: IDLH conditions require the use of a pressure demand respirator with at least a 5 minute escape cylinder The primary air line connection is attached from the compressor to the Auto-Air Breather Box A reserve air line is attached from a single or bank of air cylinders based on the required egress duration and number of workers using the system The system can be tested prior to each use to ensure proper function of the Auto-Air system Always size the reserve air systems to allow an adequate safety factor for all workers to egress the environment Please specify 1/4” Hansen style or Schrader style fittings when ordering. Other fittings available for an additional charge

The system filters compressor air to provide respirator users with Grade-D quality air. The first stage element filters bulk water and particulate, the second stage coalescing filter removes atomized oils and ultra-fine particulate, and the third stage removes organic vapors and odors. Filter change indicators are standard on all three filtration stages. Filtration efficiency is 99.99% @ .01 microns. A built-in carbon monoxide monitor operates on 115 VAC, or 8-16 VDC for continuous detection. A high intensity audible alarm and light signals the workers of high CO content in their breathing air. A 115 VAC electrical conduit box is provided as standard to provide AC power in and connection for AC powered remote alarms. Filtration components are mounted on powder coated steel panel. Features 150 CFM (203 CFM flow capacity) CO carbon monoxide monitor 99.99 percent filtration efficiency @ .01 microns NPT outlet Integrated carbon monoxide (CO) monitor uses 115 Volts AC or 8 to 16 Volts DC for continuous detection Audible high intensity alarm & light will signal workers to high CO in breathing air supply All portable and fixed breathing air filtration systems meet or exceed OSHA 1910.134, Canadian Z180.1 Breathing Air Standards and British Standard BS-EN 12021:1999 “RESPIRATORY PROTECTIVE DEVICES” All filtration units are designed to flow the NIOSH maximum capacity per worker Air Systems provides at NO CHARGE your first lab certified air quality test of your new breathing air filtration device Please specify 1/4” Hansen style or Schrader style fittings when ordering. Other fittings available for an additional charge.

The system filters compressor air to provide respirator users with Grade-D quality air. The first stage element filters bulk water and particulate, the second stage coalescing filter removes atomized oils and ultra-fine particulate, and the third stage removes organic vapors and odors. Filter change indicators are standard on all three filtration stages. Filtration efficiency is 99.99% @ .01 microns. A built-in carbon monoxide monitor operates on 115 VAC or 8-16 VDC for continuous detection. A high intensity audible alarm and light signals the workers of high CO content in their breathing air. A 115 VAC electrical conduit box is provided as standard to provide AC power in and connection for AC powered remote alarms. Filtration components are mounted on powder coated steel panel. Features 250 CFM (741 CFM flow capacity) CO carbon monoxide monitor 99.99 percent filtration efficiency @ .01 microns NPT outlet Integrated carbon monoxide (CO) monitor uses 115 Volts AC or 8 to 16 Volts DC for continuous detection Audible high intensity alarm & light will signal workers to high CO in breathing air supply All portable and fixed breathing air filtration systems meet or exceed OSHA 1910.134, Canadian Z180.1 Breathing Air Standards and British Standard BS-EN 12021:1999 “RESPIRATORY PROTECTIVE DEVICES” All filtration units are designed to flow the NIOSH maximum capacity per worker Air Systems provides at NO CHARGE your first lab certified air quality test of your new breathing air filtration device Please specify 1/4” Hansen style or Schrader style fittings when ordering. Other fittings available for an additional charge.