Search in Category
Fall Protection
Filter Your Search
Closure
Clothing Type
Color
Fabric Material
Length
Recommended Use
Size
Standards
Brand
Browse Categories
Loading...
Fall Protection
Fall Protection
Viewing Page 5 of 107
(1,067 results)
CMC 201202
Items #:
CMC 201202
A key component of a rappel technique developed by our Tactical Rappel Class instructors, our 8 Link allows you to extend your figure 8 descender further away from your harness to make room for a safety Prusik hitch below the descender. It attaches to the figure 8 with a girth hitch. Multiple carabiner slots allow proper length adjustment. Pockets break at 5 kN (1,100 lbf). Rappel 8 with ears not included.
CMC 294033
Items #:
CMC 294033
Anchor Strap Sleeve MD Black CMC Duck canvas and a layer of Shelter Rite vinyl, Anchor Strap Sleeves protect anchor straps from the elements and surface abrasion, Pull string installation feature, Anchor Strap not included
CMC 300165
Items #:
CMC 300165
Screw Lock Carabiner Black CMC Anodized patent pending key lock design, Wide gate opening fits over 1 inch diameter railings, Safety indicators etched on gate, Every carabiner is proof loaded
CMC 201014
Items #:
CMC 201014
Made of 1-inch (25-mm) mil-spec tubular web, these straps allow you to tie into your anchor with just the right length of web. They’re also handy for clipping several carabiners into one anchor point. Pockets break at 5 kN (1,100 lbf).
CMC 202425
Items #:
CMC 202425
Uniform Rappel Belt Black XL CMC Belt constructed to same standards as harness line and is the only certified uniform belt avail, Tail end and V ring attachment point are secured w/hook and loop, Belt is not intended as a substitute for a harness unless the optional Leg Loops are used
CMC 240029
Items #:
CMC 240029
Made of 1000 D Cordura® nylon for long wear under rugged conditions, our ProSeries radio harness features stabilizing back straps that also offer great comfort. The radio pocket is easy to adjust to a wide range of radios, and the spare battery pocket has a hook and loop on the bottom, so items with a hook, such as whistles, can be kept out of the way.
CMC 250202
Items #:
CMC 250202
Outstanding hand protection meets dexterity in our rappel gloves. Wear them to tie knots and work with hardware, set up a system or to rappel. Pittard’s armor-tan leather and unique Kevlar® brand fiber stitching combine for unparalleled durability. A double layer at the thumb web protects hands when rappelling, and the wear-resistant double palm guards against heat, moisture, cold, and abrasion. Its second anatomically segmented layer eases grip fatigue. The back is equally detailed spandex ventilates and delivers flexibility and comfort, while elastic at the wrist provides a secure fit. When not in use, these gloves can hang on harness gear loops using the carabiner loops sewn into the wrist.
CMC 281103
Items #:
CMC 281103
An extremely low-stretch kernmantle rescue lifeline constructed of 100% High Tenacity Polyester (HTP) fiber. The polyester fibers do not absorb water, so there is no loss of strength or increase in weight if the rope gets wet. With less than 2% stretch at 300 lbf, Static-Pro is an excellent choice for high lines, long rappels, and many mechanical advantage haul systems. Polyester fiber ropes have better resistance to acids than nylon, which makes Static-Pro the preferred choice in acidic environments. Favored for its excellent hand, knotability and UV resistance, Static-Pro Lifelines come in solid colors with a single stripe to prevent confusion with CMC Lifeline and other solid color kernmantle ropes.
Static-Pro Lifeline Specifications
The following specifications apply to all diameters of CMC Static-Pro Lifeline:
Certification — UL Classified to NFPA 1983 Standard on Life Safety Rope and Equipment for Emergency Services, 2012 Edition.
Construction — Block creel, static kernmantle.
Fiber – 100% High Tenacity Polyester (HTP).
Sheath — 32-strand braided, with half the strands having a left (Z) twist and the other half having a right (S) twist for a balanced, torque-free rope with maximum abrasion resistance.
Rating — NFPA General Use for 12.5 mm (1/2 in); NFPA Technical Use for 11 mm (7/16 in)
Temperature — Melt point 480° F (249° C)
CMC 294034
Items #:
CMC 294034
Anchor Strap Sleeve LG Black CMC Duck canvas and a layer of Shelter Rite vinyl, Anchor Strap Sleeves protect anchor straps from the elements and surface abrasion, Pull string installation feature, Anchor Strap not included
DBI 1003000
Items #:
DBI 1003000
Our anchorage connectors are built from top quality materials guaranteeing high-strength and durability to stand up to the toughest environments. Anchorage connectors are the unsung heroes of most fall protection systems, often overlooked but critical components because they securely attach your system to the anchorage. Your choice of anchor depends on the type of work being done. Anchorages are sold by what they connect to (general/all-purpose, steel, concrete, roof or specialty), whether they are fixed or mobile, and whether they are permanent or portable. They all must provide a secure point of attachment for a complete personal fall arrest system, and must be capable of supporting a load of 5,000 lb (22kN) or of meeting OSHA's criteria of a 2-to-1 safety factor.
