Eyewash and Shower Equipment
Eyewash and Shower Equipment
Viewing Page 16 of 24
(232 results)
HAW 9070
Items #:
HAW 9070
Model 9070 Filter is recommended for installation on all eyewash units for additional protection for eyes. Made of FDA approved polypropylene with disposable FDA approved viscose fiber filter media which removes particles down to 20 microns.
Flow Capacity: 7 gpm (17.8 L) max (recommended).
Maximum Working Pressure: 125 psi (8.62 bar)
Size: 15" (38.1 cm) overall by 5" (12.7 cm) diameter
Supply: 3/4" IPS inlet and outlet.
HAW 9094(PAIR)
Items #:
HAW 9094(PAIR)
Model 9094 Dust Cover is for use on all Haws Portable Eyewash Units that feature the SP12 Soft-Flo heads. It keeps eyewash heads from contamination when not in use. The Safety Green polyethylene plastic cover with integral retainer strap automatically removes when water is turned on. Sold in pairs.
HAW 9095(PAIR)
Items #:
HAW 9095(PAIR)
Model 9095 Dust Cover is for use on all Haws Non-Portable Eyewash Units that feature the SP10, SP11, SP11FC or SP18 Soft-Flo heads. It keeps eyewash heads from contamination when not in use. The Safety Green polyethylene plastic cover with integral retainer strap automatically removes when water is turned on. Sold in pairs.
HAW 9201EFE
Items #:
HAW 9201EFE
A flow rate of 1 to 12 gpm (3.8 to 45.4 L) for better temperature control across the operating range
AXION's superior design and technology provide a complete safety solution for increased victim comfort.
Lowest internal pressure drop for this class of valve (advantage where supply pressure is low)
Wax based thermostat technology for fast response time with proven highly reliable temperature control
Highest Cold Water Bypass flow rate in the industry (83% of rated tepid flow rate)
Modular brass design with internal check stops
Over-sized valve seats resist failures caused by foreign matter
A new and efficient shuttle design eliminates valve sticking
A custom funnel design improves temperature control at low flow rates
Outlet temperature is factory set to 85° F (29° C).
Tempered water: High temperature limit is factory set to 90° F (32° C).
Cold water by-pass valves are closed during normal operation, regardless of flow rate.
HAW 9201H
Items #:
HAW 9201H
A flow rate of 1 to 31 gpm (3.8 to 117.3 L) for better temperature control across the operating range
AXION's superior design and technology provide a complete safety solution for increased victim comfort.
Lowest internal pressure drop for this class of valve (advantage where supply pressure is low)
Wax based thermostat technology for fast response time with proven highly reliable temperature control
Highest Cold Water Bypass flow rate in the industry (65% of rated tepid flow rate)
Modular lead-free brass design with internal check stops
Oversized valve seats resist failures caused by foreign matter
A new and efficient shuttle design eliminates valve sticking
A custom funnel design improves temperature control at low flow rates
Outlet temperature is factory set to 85° F (29° C)
Tempered water: High temperature limit is factory set to 87° F (30° C)
Cold water by-pass valves are closed during normal operation, regardless of flow rate