General First Aid
Viewing Page 1 of 11
(102 results)
JUN JSA-1010-B
Items #:
JUN JSA-1010-B
Kit consists of Fire Blanket (JSA-1010-B) Fire Resistant Treated 100% Wool for maximum fire protection and sturdy 20 Ga. Steel Cabinet (JSA-1010-CW) ready for wall mounting. Cabinet is bright red enamel with white lettering. Viewing hole provided to see if blanket is in place
The Wrap Around Fire Blanket Kit is designed so a person can insert either arm through the rope loop and, by rotating their body, completely wrap themselves in the fire blanket.
Blanket (JSA-1010-B) and Case (JSA-1010-CW) may be ordered separately. Kit should be wall mounted 6" to 8" from floor. Complete kit meets MIL-B-52309B.
DIMENSIONS: 70-1/2" L X 5-1/4" W X 5" H; BLANKET: 62" X 82"
WEIGHT: 20 LBS. CAN SHIP VIA UPS
JUN JSA-16
Items #:
JUN JSA-16
Provide a practical solution to industrial first aid.
Kits stocked with medical supplies in sterile.
Waterproof poly-sealed containers.
Color coded for easy identification of materials.
Unit packs for easy selection and re-ordering.
Heavy metal case is water tight.
Hanger for wall mounting.
It includes curad pads, burn compound, ammonia inhalants, gauze, bandages, swabs, aspirins/tablets[50] and burn spray.
A list of contents can be permanently affixed inside the lid for easy restocking.
The case features a gasket and an easy-to-carry handle, yet is wall mountable for quick access in an emergency.
Dimensions: 10x10x10
JUN JSA-200
Items #:
JUN JSA-200
The Plastic Break-Away Splint Stretcher by Junkin Safety Appliance Company is a yellow high-density polyethylene shell supported by a stainless steel outer rail, which is permanently attached with stainless steel semi-tubular rivets. It features molded runners, fully exposed outer rail, non-absorbent foam pad secured to stretcher and four patient restraint straps. In addition, this stretcher breaks into two halves which can be back-packed to the point of rescue and assembled in seconds. Positive locking, quick release pins secure the two halves together. Junkin Model JSA-200-B.
Features
High-density polyethylene shell supported by a stainless steel outer rail
Molded runners and fully exposed outer rail
Non-absorbent foam pad is secured to stretcher
Breaks into two halves which can be back-packed to the point of rescue and assembled in seconds
WARRANTY: 1 year
Technical Specs
Dimensions: 84.50" L x 24.00" W x 7.50" H
Weight: 32 lbs.
Load Limit: 1200 lbs.
Shipping
Junkin's products usually ship in 1 to 2 weeks depending on availability. Please call us before ordering if you need to know a more accurate shipping date for this product.
JUN JSA-200B
Items #:
JUN JSA-200B
The Plastic Break-Away Splint Stretcher by Junkin Safety Appliance Company is a yellow high-density polyethylene shell supported by a stainless steel outer rail, which is permanently attached with stainless steel semi-tubular rivets. It features molded runners, fully exposed outer rail, non-absorbent foam pad secured to stretcher and four patient restraint straps. In addition, this stretcher breaks into two halves which can be back-packed to the point of rescue and assembled in seconds. Positive locking, quick release pins secure the two halves together. Junkin Model JSA-200-B.
Features
High-density polyethylene shell supported by a stainless steel outer rail
Molded runners and fully exposed outer rail
Non-absorbent foam pad is secured to stretcher
Breaks into two halves which can be back-packed to the point of rescue and assembled in seconds
WARRANTY: 1 year
Technical Specs
Dimensions: 84.50" L x 24.00" W x 7.50" H
Weight: 32 lbs.
Load Limit: 1200 lbs.
Shipping
Junkin's products usually ship in 1 to 2 weeks depending on availability. Please call us before ordering if you need to know a more accurate shipping date for this product.
JUN JSA-300-A
Items #:
JUN JSA-300-A
Civil Defense Splint Stretcher Kits JSA-333-A by Junkin Safety. JSA-300 Series stretcher. Model shown is JSA-300-A Stretcher. (Please specify model stretcher when ordering). Kit also includes two JSA-502 Safety Blankets and one JSA-300-X Stretcher Bridle Sling.
JUN JSA-300-W
Items #:
JUN JSA-300-W
Basket Type Without Leg Divider Stretchers JSA-300-W by Junkin Safety. Designed to accommodate most standard 16" x 72" full length backboards. Also available with Plastisol coating (JSA-300-W PC).
Stretcher Features:
Without Leg Divider Stretcher
Accommodate most standard 16" x 72" full length backboards
Also available with Plastisol coating (JSA-300-W PC)
Dimensions: 82" L x 8-1/2" H
Carton Size: 83" x 24" x 9"
Widths: Chest: 24-1/4"; Abdomen: 24"; Thigh: 23-1/2"; Calf: 23".
Weight: 31 lbs.
Load Capacity: 1500 lbs.
JUN JSA-300-X
Items #:
JUN JSA-300-X
The JSA-300-X Stretcher Bridle Sling provides horizontal or vertical lifting capacity of up to 2,500 lbs. Made of 1" nylon webbing resistant to moisture and fungus rot with forged snap hooks and 3" ID forged steel suspension ring.
DIMENSIONS: 35-1/4" H X 18-7/8" W X 22-3/8" D
FOLDED: 8"
BACK WHEELS: 5"
WEIGHT: 15-1/2 LBS.
LOAD CAPACITY: 2500 LBS.
JUN JSA-300XC
Items #:
JUN JSA-300XC
The Stretcher Bridle Sling by Junkin Safety Appliance Company provides horizontal or vertical lifting capacity of up to 2,500 lbs. Made of 1" nylon webbing resistant to moisture and fungus rot with 4 carabiners and a 3" ID forged steel suspension ring. Junkin Model JSA-300-XC.
Features
Work with Junkin's 200 series & 300 series of stretchers
Provides horizontal or vertical lifting capacity of up to 2,500 lbs.
Made of 1" nylon webbing resistant to moisture and fungus rot with 4 carabiners and a 3" ID forged steel suspension ring
WARRANTY: 90 days
Technical Specs
Load Limit: 2500 lbs. (1134 Kg)
Weight: 5 lbs.
Shipping
Junkin's products usually ship in 1 to 2 weeks depending on availability. Please call us before ordering if you need to know a more accurate shipping date for this product.