Search in Category
Hard Hats
Filter Your Search
Color
Length
Recommended Use
Brand
Browse Categories
Loading...
Hard Hats
Head and Face ProtectionHard Hats
Viewing Page 9 of 26
(253 results)
BUL 51KBR
Items #:
BUL 51KBR
3M hard hats with custom logos or designs are not available through Shop3M.com. For more information about these custom products, visit 3M.com/hardhatcustomizer.
3M personal protective equipment sold through Shop3M.com is only intended for US occupational workplace use. This 3M personal protective equipment must be used in compliance with the Occupational Safety and Health Administration (OSHA) Personal Protective Equipment (PPE) standard (29 CFR 1910.132) and all other applicable health and safety standards, as well as all user instructions, warnings and limitations accompanying each product. It is essential that all product user instructions and government regulations on the use of each product be followed in order for the product to help protect the wearer. Misuse of personal protective equipment may result in injury, sickness, or death. For correct product selection and use, individuals should consult their on-site safety professional or industrial hygienist. For additional product information, visit www.3M.com/PPESafety.
BUL 62YLR
Items #:
BUL 62YLR
"Peak" Series Cap-Style Hard Hats have three level height adjustments to create the proper fit quickly and easily. Hats have a grooved outer shell and rain trough to help guide water away from the face. There's also an additive in the HDPE construction that protects the face and head from UV rays. All hats have accessory slots, 4-point suspensions, and meet ANSI Z89.1, Type I, Class E.-Peak Series w/ Ratchet Suspension, Yellow - Manufacturer: Honeywell Formerly - Honeywell
BUL 71DGP
Items #:
BUL 71DGP
Item Details
You'll find style and versatility with the Standard Series. Featuring a four-point suspension, these hats are lightweight, low profile and have a low center of gravity, providing exceptional balance. Models S51, S61, and S71 meet ANSI/ISEA Z89.1, Type I, Class E and G requirements. Model S51 meets CSA Z94.1-2005, Type 1, Class E and G requirements, and EN397 requirements. Model S62 meets ANSI/ISEA Z89.1, Type I, Class C requirements.
Features
4-point suspension
Pillowed cotton, poly, or vinyl brow pads
¾” wide seamless nylon crown straps
Front and rear vertical height adjustments
Product Attributes
Cap Type
» Hard Hat
Suspension
» 4 Point Pinlock, Pinlock
Brim Style
» Full Brim
Material
» HDPE, High Density Polyethylene, Polyethylene
Brand Name
» Standard S71
Cap Class
» E, G
ANSI Type
» I
Color
» Gray
BUL 71FGR
Items #:
BUL 71FGR
Item Details
You'll find style and versatility with the Standard Series. Featuring a four-point suspension, these hats are lightweight, low profile and have a low center of gravity, providing exceptional balance. Models S51, S61, and S71 meet ANSI/ISEA Z89.1, Type I, Class E and G requirements. Model S51 meets CSA Z94.1-2005, Type 1, Class E and G requirements, and EN397 requirements. Model S62 meets ANSI/ISEA Z89.1, Type I, Class C requirements.
Features
4-point suspension
Pillowed cotton, poly, or vinyl brow pads
¾” wide seamless nylon crown straps
Front and rear vertical height adjustments
Product Attributes
Cap Type
» Hard Hat
Suspension
» 4 Point Ratchet, Ratchet
Brim Style
» Full Brim
Material
» HDPE, High Density Polyethylene, Polyethylene
Brand Name
» Standard S71
Cap Class
» E, G
ANSI Type
» I
Color
» Green
BUL 71KBR
Items #:
BUL 71KBR
Item Details
Bullard® Standard Series Kentucky Blue Hard Hat With Full Brim And 4 Point Flex-Gear® Ratchet Suspension is perfect for most applications. Polyethylene cap Features pillowed cotton, poly or vinyl brow pads and 3/4" wide seamless nylon crown straps for comfort. It has sleek style low profile design with front and rear vertical height adjustments. Lightweight, low profile cap has low center of gravity which offers exceptional balance. Suspension snaps in with an audible click and accessory slots accept a wide variety of attachments. It meets or exceeds ANSI/ISEA Z89.1-2009, Type I Class E and G standards.
Features
The upgraded suspension system provides a more comfortable, secure fit
Low profile design offers sleek style
Your logo can be applied in any of eight different locations
Easy to adjust Flex-Gear® ratchet sizing or standard suspensions available
Replaceable cotton brow pad is pillowed for maximum comfort, Velcro replacement brow pads are available in absorbent cotton, a cooling material, or a vinyl material
Features accessory slots for attaching a variety of accessories such as earmuffs and face protection, including those of other manufacturers
Bullard reputation can be seen in the attention to detail on comfort and fit
Distinctive 3-Rib trademark
Specifications
ANSI Z89.1 2009
Product Attributes
Cap Type
» Hard Hat
Suspension
» 4 Point Ratchet
Brim Style
» Full Brim
Material
» HDPE, High Density Polyethylene, Polyethylene
Brand Name
» Standard S71
Cap Class
» E, G
ANSI Type
» I
Color
» Blue
BUL 71KGR
Items #:
BUL 71KGR
Item Details
Bullard® Standard Series Kelly Green Hard Hat With Full Brim And 4 Point Flex-Gear® Ratchet Suspension is perfect for most applications. Polyethylene cap Features pillowed cotton, poly or vinyl brow pads and 3/4" wide seamless nylon crown straps for comfort. It has sleek style low profile design with front and rear vertical height adjustments. Lightweight, low profile cap has low center of gravity which offers exceptional balance. Suspension snaps in with an audible click and accessory slots accept a wide variety of attachments. It meets or exceeds ANSI/ISEA Z89.1-2009, Type I Class E and G standards.
Features
The upgraded suspension system provides a more comfortable, secure fit
Low profile design offers sleek style
Your logo can be applied in any of eight different locations
Easy to adjust Flex-Gear® ratchet sizing or standard suspensions available
Replaceable cotton brow pad is pillowed for maximum comfort, Velcro replacement brow pads are available in absorbent cotton, a cooling material, or a vinyl material
Features accessory slots for attaching a variety of accessories such as earmuffs and face protection, including those of other manufacturers
Bullard reputation can be seen in the attention to detail on comfort and fit
Distinctive 3-Rib trademark
Specifications
ANSI Z89.1 2009
Product Attributes
Cap Type
» Hard Hat
Suspension
» 4 Point Ratchet
Brim Style
» Full Brim
Material
» HDPE, High Density Polyethylene, Polyethylene
Brand Name
» Standard S71
Cap Class
» E, G
ANSI Type
» I
Color
» Green
BUL 71LPR
Items #:
BUL 71LPR
Item Details
Bullard® Standard Series Pink Hard Hat With Full Brim And 4 Point Flex-Gear® Ratchet Suspension is perfect for most applications. Polyethylene cap Features pillowed cotton, poly or vinyl brow pads and 3/4" wide seamless nylon crown straps for comfort. It has sleek style low profile design with front and rear vertical height adjustments. Lightweight, low profile cap has low center of gravity which offers exceptional balance. Suspension snaps in with an audible click and accessory slots accept a wide variety of attachments. It meets or exceeds ANSI/ISEA Z89.1-2009, Type I Class E and G standards.
Features
The upgraded suspension system provides a more comfortable, secure fit
Low profile design offers sleek style
Your logo can be applied in any of eight different locations
Easy to adjust Flex-Gear® ratchet sizing or standard suspensions available
Replaceable cotton brow pad is pillowed for maximum comfort, Velcro replacement brow pads are available in absorbent cotton, a cooling material, or a vinyl material
Features accessory slots for attaching a variety of accessories such as earmuffs and face protection, including those of other manufacturers
Bullard reputation can be seen in the attention to detail on comfort and fit
Distinctive 3-Rib trademark
Specifications
ANSI Z89.1 2009
Product Attributes
Cap Type
» Hard Hat
Suspension
» 4 Point Ratchet
Brim Style
» Full Brim
Material
» HDPE, High Density Polyethylene, Polyethylene
Brand Name
» Standard S71
Cap Class
» E, G
ANSI Type
» I
Color
» Pink
BUL 71ORP
Items #:
BUL 71ORP
Item Details
Bullard® Standard Series Orange Hard Hat With Full Brim And 4 Point Flex-Gear® Suspension is perfect for most applications. Polyethylene cap Features pillowed cotton, poly or vinyl brow pads and 3/4" wide seamless nylon crown straps for comfort. It has sleek style low profile design with front and rear vertical height adjustments. Lightweight, low profile cap has low center of gravity which offers exceptional balance. Suspension snaps in with an audible click and accessory slots accept a wide variety of attachments. It meets or exceeds ANSI/ISEA Z89.1-2009, Type I Class E and G standards.
Features
The upgraded suspension system provides a more comfortable, secure fit
Low profile design offers sleek style
Your logo can be applied in any of eight different locations
Easy to adjust Flex-Gear® ratchet sizing or standard suspensions available
Replaceable cotton brow pad is pillowed for maximum comfort, Velcro replacement brow pads are available in absorbent cotton, a cooling material, or a vinyl material
Features accessory slots for attaching a variety of accessories such as earmuffs and face protection, including those of other manufacturers
Bullard reputation can be seen in the attention to detail on comfort and fit
Distinctive 3-Rib trademark
Specifications
ANSI Z89.1 2009
Product Attributes
Cap Type
» Hard Hat
Suspension
» 4 Point Pinlock, Pinlock
Brim Style
» Full Brim
Material
» HDPE, High Density Polyethylene, Polyethylene
Brand Name
» Standard S71
Cap Class
» E, G
ANSI Type
» I
Color
» Orange
BUL 71ORR
Items #:
BUL 71ORR
Item Details
You'll find style and versatility with the Standard Series. Featuring a four-point suspension, these hats are lightweight, low profile and have a low center of gravity, providing exceptional balance. Models S51, S61, and S71 meet ANSI/ISEA Z89.1, Type I, Class E and G requirements. Model S51 meets CSA Z94.1-2005, Type 1, Class E and G requirements, and EN397 requirements. Model S62 meets ANSI/ISEA Z89.1, Type I, Class C requirements.
Features
4-point suspension
Pillowed cotton, poly, or vinyl brow pads
¾” wide seamless nylon crown straps
Front and rear vertical height adjustments
Product Attributes
Cap Type
» Hard Hat
Suspension
» 4 Point Ratchet, Ratchet
Brim Style
» Full Brim
Material
» HDPE, High Density Polyethylene, Polyethylene
Brand Name
» Standard S71
Cap Class
» E, G
ANSI Type
» I
Color
» Orange
