Hard Hats

The Jackson Safety 20697 Blockhead hard hat is a protective helmet molded from HDPE with an eight-point adjustable ratchet suspension, a smooth dome, and a full brim to help protect the wearer from sun and rain. This protective headwear meets American National Standards Institute (ANSI) Z89.1-2003 Type 1 impact requirements for protection from impact striking the top of the head and Class E electrical requirements to reduce the danger of exposure to high voltage conductors. The eight-point adjustable ratchet suspension provides over 30 adjustment levels between sizes 6-1/2 to 8" for a comfortable fit, provides more impact protection than four- or six- point suspensions, and can be adjusted without removing the hat. The HDPE (high-density polyethylene) outer shell is lightweight (16.3 oz.) for comfort, and impact resistant. The suspension straps and nape strap are made of woven nylon, which has a good strength-to-weight ratio and resists mold growth. This hat fits hat coil spring attachment model 37 Hatshield for attachment of any Jackson Safety face shield (all attachments sold separately). Hard hats are personal protective equipment (PPE) worn on the head in workplace environments to help protect the wearer from injuries caused by falling objects, debris, or electrical conductors. These hats consist of an outer shell, typically plastic or fiberglass, and a multipoint suspension system that keeps the shell suspended above the head. More points in the suspension system provide better distribution of the force of impacts for more protection. Suspensions may include either a chinstrap to prevent the hat from falling off, or a nape strap to prevent the hat from sliding forward and falling off when the wearer is leaning forward. These straps are usually adjustable for a comfortable fit, using either a pinlock or ratchet system. A ratchet system adjusts with the turning of a knob on the nape strap and may be adjusted with the hat on. A pinlock system consists of a strap with pins and a strap with holes, and it must be aligned and set with the hat removed.

The Jackson Safety 20702 Blockhead hard hat is a protective helmet molded from highly visible red HDPE with an eight-point adjustable ratchet suspension, a smooth dome, and a full brim to help protect the wearer from sun and rain. This protective headwear meets American National Standards Institute (ANSI) Z89.1-2003 Type 1 impact requirements for protection from impact striking the top of the head and Class E electrical requirements to reduce the danger of exposure to high voltage conductors. The eight-point adjustable ratchet suspension provides over 30 adjustment levels between sizes 6-1/2 to 8" for a comfortable fit, provides more impact protection than four- or six- point suspensions, and can be adjusted without removing the hat. The HDPE (high-density polyethylene) outer shell is lightweight (16.3 oz.) for comfort, and impact resistant. The suspension straps and nape strap are made of woven nylon, which has a good strength-to-weight ratio and resists mold growth. This hat fits hat coil spring attachment model 37 Hatshield for attachment of any Jackson Safety face shield (all attachments sold separately). Hard hats are personal protective equipment (PPE) worn on the head in workplace environments to help protect the wearer from injuries caused by falling objects, debris, or electrical conductors. These hats consist of an outer shell, typically plastic or fiberglass, and a multipoint suspension system that keeps the shell suspended above the head. More points in the suspension system provide better distribution of the force of impacts for more protection. Suspensions may include either a chinstrap to prevent the hat from falling off, or a nape strap to prevent the hat from sliding forward and falling off when the wearer is leaning forward. These straps are usually adjustable for a comfortable fit, using either a pinlock or ratchet system. A ratchet system adjusts with the turning of a knob on the nape strap and may be adjusted with the hat on. A pinlock system consists of a strap with pins and a strap with holes, and it must be aligned and set with the hat removed.

The Jackson Safety 20718 Blockhead hard hat is a protective helmet molded from HDPE with an eight-point adjustable ratchet suspension, a smooth dome, and a full brim to help protect the wearer from sun and rain. This protective headwear meets American National Standards Institute (ANSI) Z89.1-2003 Type 1 impact requirements for protection from impact striking the top of the head and Class E electrical requirements to reduce the danger of exposure to high voltage conductors. The eight-point adjustable ratchet suspension provides over 30 adjustment levels between sizes 6-1/2 to 8" for a comfortable fit, provides more impact protection than four- or six- point suspensions, and can be adjusted without removing the hat. The HDPE (high-density polyethylene) outer shell is lightweight (16.3 oz.) for comfort, and impact resistant. The suspension straps and nape strap are made of woven nylon, which has a good strength-to-weight ratio and resists mold growth. This hat fits hat coil spring attachment model 37 Hatshield for attachment of any Jackson Safety face shield (all attachments sold separately). Hard hats are personal protective equipment (PPE) worn on the head in workplace environments to help protect the wearer from injuries caused by falling objects, debris, or electrical conductors. These hats consist of an outer shell, typically plastic or fiberglass, and a multipoint suspension system that keeps the shell suspended above the head. More points in the suspension system provide better distribution of the force of impacts for more protection. Suspensions may include either a chinstrap to prevent the hat from falling off, or a nape strap to prevent the hat from sliding forward and falling off when the wearer is leaning forward. These straps are usually adjustable for a comfortable fit, using either a pinlock or ratchet system. A ratchet system adjusts with the turning of a knob on the nape strap and may be adjusted with the hat on. A pinlock system consists of a strap with pins and a strap with holes, and it must be aligned and set with the hat removed.

Hard Hat Rachet - Yellow

Kimberly-Clark Professional* Jackson Safety* Black Western Outlaw Hard Hat with 4-point ratchet suspension features ratchet that is suitable for 6 1/2 - 8" head sizes. Hat comes with wide brim that offers protection against sunlight and rain. It provides stylish look and comfortable as well as perfect fit. It meets ANSI Z89.1 type I, class G, E and C standards. Features Stylish, comfortable and fits all head sizes Wide brim for protection against sunlight 4-point ratchet suspension Head sizes 6 1/2 - 8"

CATEGORY: Safety & Security. Head/Face Protection. Hard Hats & Caps. FAMILY: CHARGER* Hard Hats. ITEM: Charger Hard Hat/Ratchet, Red. FEATURES: 4 point injection molded suspension with nylon straps. Accessory slot for attaching additional personal protective equipment. Built-in rain trough. Contoured dome maximizes protection while providing a sleek, low profile. Head sizes 6.5 to 8. Lightweight for comfort. Lightweight for comfort, molded from High Density Polyethylene (HDPE). Molded from high density polyethylene (HDPE). Ratchet sizing from head sizes: 6.5 to 8. Sleek and low profile. Trim bill style for greater upward vision. TESTING AND APPROVALS: ANSI Z89.1 Class C, G, E. ANSI Z89.1, Type 1, Class C, G & E. ATTRIBUTES: Brand Name=Kimberly-Clark Professional. Color=Red. Suspension=4 Point Ratchet. Material=HDPE. Type=Safety Cap. Closure Type=Ratchet. Depth=11 1/2 in. Height=5 1/2 in. Width=8 3/4 in. 0.84 lb.

Lightweight for comfort- only 13.5 oz Contoured dome maximizes protection while providing a sleek, low profile Trim bill style for greater upward vision, ideal for vision attachment Low nape strap and rain trough Universal slots allow for easy attachment of hearing, welding, and faceshield accessories Attaches to 137 Capshield, Model P, Model C, 337 Capshield, A-5500SN and A-5500X; Meets ANSI Z89.1 Type 1, Class C, G and E; Color Hi-Viz Lime Green Suspension 4 Point, Pin-Lock, Ratchet Material High Density Polyethylene Quantity 12 per Box

HARD HAT YL RATCHET SN3 12/CS

Hard Hat, Style: Front Brim, Color: Navy Blue, Graphics: None, ANSI Type: 1, ANSI Class: C, G, E, Venting: No, Accessory Slots: Yes, Suspension: 4 pt. Ratchet, Shell Material: High Density Polyethylene, Standards: ANSI/ISEA Z89.1-2009

Looking for a new or replacement hard hat? Why not choose one from the best selling hard hat family in all of North America. These bad boys are constructed of a polyethylene shell and feature self adjusting head straps for the best in lightweight comfortable head protection.