Hard Hats

The Jackson Safety 14845 SC-6 hard hat is a cap-style protective helmet molded from highly visible lime HDPE with a four-point adjustable ratchet suspension, a smooth dome, and a universal accessory slot. This protective headwear meets American National Standards Institute (ANSI) Z89.1-2003 Type 1 impact requirements for protection from impact striking the top of the head and Class E electrical requirements to reduce the danger of exposure to high voltage conductors. The four-point adjustable ratchet suspension provides over 30 adjustment levels between sizes 6-1/2 to 8" for a comfortable fit, and it can be adjusted without removing the hat. The HDPE (high density polyethylene) outer shell is lightweight (12.4 oz.) for comfort, impact resistant, and has a full visor to reduce glare from sun or overhead lighting. The suspension straps and nape strap are made of woven nylon, which has a good strength-to-weight ratio and resists mold growth. The universal accessory slot provides compatibility with accessories to extend protection or vision range such as face shields, headlamps, and rearview mirrors (accessories sold separately). This hat also fits some attachments for non-slotted hats, such as cap coil spring attachment models 137 Capshield, Model P, cord-mounted attachment model 337 Capshield, and blade-mounted attachment model 437 Capshield (all attachments sold separately). Hard hats are personal protective equipment (PPE) worn on the head in workplace environments to help protect the wearer from injuries caused by falling objects, debris, or electrical conductors. These hats consist of an outer shell, typically plastic or fiberglass, and a multipoint suspension system that keeps the shell suspended above the head. More points in the suspension system provide better distribution of the force of impacts for more protection. Suspensions may include either a chinstrap to prevent the hat from falling off, or a nape strap to prevent the hat from sliding forward and falling off when the wearer is leaning forward. These straps are usually adjustable for a comfortable fit, using either a pinlock or ratchet system. A ratchet system adjusts with the turning of a knob on the nape strap and may be adjusted with the hat on. A pinlock system consists of a strap with pins and a strap with holes, and it must be aligned and set with the hat removed.

Western Outlaw™ Hard Hats offer up protection that passes ANSI Z89.1, Type I, Class G. They’re comfortable, and the wide brim provides added sun protection. All hard hats have a 4-point ratchet suspension.

This "Cowboy" safety hardhat provides stylish, comfortable, and enhanced protection. Made of high-impact, UV resistant, special HDPE blended plastic. The broad brim protects your eyes from bright light and your neck from sunburn and rain. The browpad is adequately ventilated to prohibit irritation and to absorb perspiration. High quality ratchet suspensions that adjust comfortably to fit any head size.

Built-In Rain Trough. Sleek and Low Profile. Lightweight for comfort. Molded from High Density Polyethylene (HDPE). Trim bill style for greater upward vision. 4 point injection molded suspension with nylon straps. Ratchet sizing from head sizes: 6-1/2 to 8. Meet ANSI Z89.1 Class C, G, E standards

Built-In Rain Trough Sleek and Low Profile Lightweight for comfort Molded from High Density Polyethylene (HDPE) Trim bill style for greater upward vision 4 point injection molded suspension with nylon straps Ratchet sizing from head sizes: 6-1/2 to 8 Meet ANSI Z89.1 Class C, G, E standards

Jackson Safety 20401 Charger High Density Polyethylene Hard Hat with 4 Point Ratchet Suspension, Yellow (Pack of 12) Protective headwear molded from lightweight (13.5 oz.) yellow HDPE for comfort, impact resistance, and high visibility Four-point adjustable ratchet suspension with woven nylon straps provides over 30 adjustment levels between sizes 6-1/2 to 8" for comfortable fit, and it can be adjusted without removing headgear Meets ANSI Z89.1-2003 Type 1 impact requirements for protection from impact striking the top of the head and Class E electrical requirements to reduce the danger of exposure to high voltage conductors Contoured dome, cap-style helmet with a trim bill for greater range of upward vision than a full brim or visor Universal accessory slots for compatibility with accessories to extend protection or vision range

Jackson Safety 20403 Charger High Density Polyethylene Hard Hat with 4 Point Ratchet Suspension, Neon Pink (Pack of 12) - Protective helmets are classified according to the specific impact and electrical performance requirements they are designed to meet. All protective helmets in accordance with this standard shall meet either Type I or Type II impact requirements. In addition, all helmets are further classified as meeting Class G, Class E, or Class C electrical requirements. Meets ANSI Z89.1, 2003 Type I, Class G, E and C Standards. Universal slots allow for easy attachment of hearing, welding, and faceshield accessories. 4 ratchet suspension. Attaches to 137 Capshield, Model P, Model C, 337 Capshield, A-5500SN and A-5500X. Head sizes 6-1/2" to 8". - Most orders ship in 3 to 4 business days." - R1

The Jackson Safety 20698 Blockhead hard hat is a protective helmet molded from highly visible yellow HDPE with an eight-point adjustable ratchet suspension, a smooth dome, and a full brim to help protect the wearer from sun and rain. This protective headwear meets American National Standards Institute (ANSI) Z89.1-2003 Type 1 impact requirements for protection from impact striking the top of the head and Class E electrical requirements to reduce the danger of exposure to high voltage conductors. The eight-point adjustable ratchet suspension provides over 30 adjustment levels between sizes 6-1/2 to 8" for a comfortable fit, provides more impact protection than four- or six- point suspensions, and can be adjusted without removing the hat. The HDPE (high-density polyethylene) outer shell is lightweight (16.3 oz.) for comfort, and impact resistant. The suspension straps and nape strap are made of woven nylon, which has a good strength-to-weight ratio and resists mold growth. This hat fits hat coil spring attachment model 37 Hatshield for attachment of any Jackson Safety face shield (all attachments sold separately). Hard hats are personal protective equipment (PPE) worn on the head in workplace environments to help protect the wearer from injuries caused by falling objects, debris, or electrical conductors. These hats consist of an outer shell, typically plastic or fiberglass, and a multipoint suspension system that keeps the shell suspended above the head. More points in the suspension system provide better distribution of the force of impacts for more protection. Suspensions may include either a chinstrap to prevent the hat from falling off, or a nape strap to prevent the hat from sliding forward and falling off when the wearer is leaning forward. These straps are usually adjustable for a comfortable fit, using either a pinlock or ratchet system. A ratchet system adjusts with the turning of a knob on the nape strap and may be adjusted with the hat on. A pinlock system consists of a strap with pins and a strap with holes, and it must be aligned and set with the hat removed.

The Jackson Safety 20738 Blockhead hard hat is a protective helmet molded from highly visible orange HDPE with an eight-point adjustable ratchet suspension, a smooth dome, and a full brim to help protect the wearer from sun and rain. This protective headwear meets American National Standards Institute (ANSI) Z89.1-2003 Type 1 impact requirements for protection from impact striking the top of the head and Class E electrical requirements to reduce the danger of exposure to high voltage conductors. The eight-point adjustable ratchet suspension provides over 30 adjustment levels between sizes 6-1/2 to 8" for a comfortable fit, provides more impact protection than four- or six- point suspensions, and can be adjusted without removing the hat. The HDPE (high-density polyethylene) outer shell is lightweight (16.3 oz.) for comfort, and impact resistant. The suspension straps and nape strap are made of woven nylon, which has a good strength-to-weight ratio and resists mold growth. This hat fits hat coil spring attachment model 37 Hatshield for attachment of any Jackson Safety face shield (all attachments sold separately). Hard hats are personal protective equipment (PPE) worn on the head in workplace environments to help protect the wearer from injuries caused by falling objects, debris, or electrical conductors. These hats consist of an outer shell, typically plastic or fiberglass, and a multipoint suspension system that keeps the shell suspended above the head. More points in the suspension system provide better distribution of the force of impacts for more protection. Suspensions may include either a chinstrap to prevent the hat from falling off, or a nape strap to prevent the hat from sliding forward and falling off when the wearer is leaning forward. These straps are usually adjustable for a comfortable fit, using either a pinlock or ratchet system. A ratchet system adjusts with the turning of a knob on the nape strap and may be adjusted with the hat on. A pinlock system consists of a strap with pins and a strap with holes, and it must be aligned and set with the hat removed.