Brand
Confined Space Equipment
Confined Space Equipment
Viewing Page 6 of 42
(420 results)
AIR SV189T-29N
Items #:
AIR SV189T-29N
Provides positive or negative pressure ventilation to supplement confined space entry operations in large work areas or tanks and is ideal for hazardous environments.
AIR SV90-29
Items #:
AIR SV90-29
Conductive 90 Degrees Elbow, Construction Polyethylene, For Use With Mfr.No. SV-189, Color Orange
AIR SVB-A8
Items #:
AIR SVB-A8
The SVB-A8 Pneumatic Blower is ideal for using in hazardous locations and operates with an air supply in the range of 10 to 100 - PSI.
AIR SVB-A8CUP
Items #:
AIR SVB-A8CUP
The SVB-A8 Pneumatic Blower is ideal for using in hazardous locations and operates with an air supply in the range of 10 to 100 - PSI.
AIR SVB-E82CUP
Items #:
AIR SVB-E82CUP
Brand: Air Systems International
The saddle vent ventilator provides continuous access to the manhole for either entry or egress. Traveling in and out of the confined space can now be done quickly and safely. The Saddle Vent increases worker productivity as well as the ability to perform confined entry rescue. The entire Saddle Vent system can be completely set up in less than five minutes. Eight inch air duct is installed on the bottom of The Saddle Vent and run to the bottom of the manhole. This allows fresh air to be supplied to the workers and displace any harmful gases that may be deadly for the occupants. The use of the 90 degree elbow removes the severe kink in the air duct and allows for rotation of the intake duct to any desired position at the street level. The kit includes SVB-E8-2 blower and SV -CUP saddle vent ventilation kit.
AIR SVB-E8SCUP
Items #:
AIR SVB-E8SCUP
Brand: Air Systems International
Air Systems International Single Speed Electric Blower Kit includes 8" SVB-E8 blower and SV-CUP Saddle Vent® ventilation kit. It has 8" air duct that is installed on the bottom of The Saddle Vent® and run to the bottom of the manhole. Duct permits fresh air to be supplied to the workers and removes any harmful gases that may be deadly for the occupants. 90 deg elbow displaces the severe kink in the air duct and permits for rotation of the intake duct to any desired position at the street level.
AIR SVB-G8
Items #:
AIR SVB-G8
The Air System SVB G8 Gasoline Powered Blower is a CE registered blower equiped with a heavy-duty 3.5 HP Briggs & Stratton motor. In its steel frame, it accommodates a 5 feet exhaust hose with a gas-tight muffler preventing any intake of the CO exhaust.
AIR SVB-G8-H
Items #:
AIR SVB-G8-H
Propane Engine - Model SVB-G8P: Includes propane conversion kit, Briggs & Stratton engine and propane tank
AIR SVB-IF9HE
Items #:
AIR SVB-IF9HE
Air Systems® Inlet Filter Assembly is designed for SVB series of portable industrial blowers and filters ambient air in confined space. The system controls dust and particulates from entering a confined space where industrial coatings are being applied reducing dust ignition. It has HEPA 99.97% efficient at 0.3 micron and has 25' duct with 40% flow reduction
AIR SVB-IF9ST
Items #:
AIR SVB-IF9ST
This inlet filter is designed to fit Air Systems' "SVB" series of portable industrial blowers. The unit filters the ambient air where the blower is located so that workers in a confined space are not exposed to ambient dusts. This system will control dusts and particulates from entering a confined space where industrial coatings are being applied. The filter will also reduce the potential for dust ignition in confined space when used with an explosion-proof or intrinsically safe blower. Filters are available with 5 micron of 99.97% HEPA rating.
